Flex Bammer Vario Plus Giraffe Wall And Ceiling Sander 230 Volt

The flex varioplus giraffe wall and ceiling sander is ideally suited for sanding plaster boards, solid styropor insulation slabs, preparation for painting, polishing. It has electronic control which gives controlled constant speed, soft-start, overload protection and speed selection with adjuster wheel. Using a unique telescopic system, the vario-giraffe adapts to your needs with the length being adjustable from 1330mm to 1730mm and the handle rotates through 360.

The ergonomic design offers many different handling possibilities for fatigue-free working. The motor is always kept between the gripping positions, ensuring a perfect balance. The articulating sanding head can be adjusted to every tilt and angle.

Fitted with interchangeable heads that are attached and removed with a click, including triangular sander head. This is optimally suited to sanding corners and edges with the random orbital movement of the sanding head takes the abrasive right up to the edges with the backing pad with hook and loop face.

Effective dust extraction from between the brush ring and the sanding pad (round) and through the 10-hole extraction ports prevents premature clogging of the abrasive and promotes a healthy, dust-free working environment. The brush ring is spring-mounted so that the round sanding head accurately follows all uneven contours. This allows the head to be applied with fingertip precision and also prevents any dust escaping

Specifications
Power input: 710 watt
Power output: 20 watt
Speed without load: 1000-1500/min
Corner sander no-load speed: 3000-4500/min
Dimensions inmm: 1330-1730
Weight: 4,80 kg

Standard equipment
Triangular sanding head: 350.354
Round sanding head: 350.346
Velcro sand paper: 1 each p60, p80, p100, 220
Hook and loop abrasive paper, angular: p60, p80, p100, 220
4 m vacuum hose, 2mm with positive-lock connector and vac connection, antistatic.
Padded carry case