TIK Products

Show:
Sort By:
  • Whether you are clamping or spreading: the original BESSEY DuoKlamp always lies securely in your hand.
  • Thats because the handle and pump lever are parallel to the rail, thus ensuring the best possible hold.
  • The innovative DuoKlamp makes going from clamping to spreading amazingly easy.
£0.00 Ex Tax: £0.00
  • The one-handed clamp EHZ - full power with just one hand.
  • This extremely sturdy original BESSEY one-handed clamp EHZ is perfect for all work that needs to be carried out with one hand.
  • for overhead tasks, or if a further tool needs to be used at the same time for aligning purposes.
£0.00 Ex Tax: £0.00
  • Increasingly high clamping pressures, with larger throat depths and wider openings.
  • These are the demands that original BESSEY high-performance clamps need to fulfil on a daily basis.
  • Used in steel and boiler construction, shipbuilding and automotive engineering.
£0.00 Ex Tax: £0.00
  • These Bessey STC Self-Adjusting Horizontal Toggle Clamps automatically adjust to different workpiece heights, while maintaining a constant clamping force.
  • They ensure quick and secure clamping and are ideal for small-scale productions.
  • Using the set screw on the cantilevered joint, the clamping force can be adjusted to meet particular requirements.
£0.00 Ex Tax: £0.00
  • Ideal for sensitive workpieces and right angles.
  • The large, perfectly parallel jaw faces are characteristic of the original BESSEY K-body clamp.
  • They allow easy clamping and spreading of sensitive surfaces and right angles.
£0.00 Ex Tax: £0.00
  • The Bessey VarioClippix XV Spring Clamps offer variable clamping force and are perfect for gluing, clamping and securing objects.
  • They feature soft, anti-slip Ergonomic handles that offer quick and easy one handed operation.
  • The self adjusting caps offer secure, non-marking clamping.
£0.00 Ex Tax: £0.00
  • Channel nuts.
  • Bright zinc plated CR3+.
£3.06 Ex Tax: £2.55
  • Channel nuts.
  • Bright zinc plated CR3+.
£3.37 Ex Tax: £2.81
  • Dome nuts provide a more aesthetically pleasing finish to a standard nut.
  • Bright zinc plated CR3+ DIN1587.
£2.29 Ex Tax: £1.91
  • An internally threaded socket anchor for use with bolts or threaded rod of any length.
  • May be set flush or at a depth.
  • Full expansion can be guaranteed by using the correct shouldered setting punch.
  • Suitable for use in concrete.
  • The drop in anchor is a deformation controlled anchor for use in solid concrete.
  • It has an internal thread suitable for attaching threaded studs and bolts.
£3.25 Ex Tax: £2.71
  • Form A flat washers are thicker than the more popular form B type washers.
  • They are brass and conform to DIN125 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£3.06 Ex Tax: £2.55
  • Form A flat washers are thicker than the more popular form B type washers.
  • They are galvanised for increased resistance to corrosion, and conform to DIN125 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£1.07 Ex Tax: £0.89
  • Form A flat washers are thicker than the more popular form B type washers.
  • They are zinc plated for resistance to corrosion, and conform to DIN125 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.98 Ex Tax: £0.82
  • Form B flat washers are thinner than the heavier duty form A type washers.
  • They are brass and conform to DIN125 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£2.33 Ex Tax: £1.94