Due to the recent Covid-19 outbreak, our trade counter is currently closed for customers.

Collection is available on orders with instructions for collections once orders are placed.

Courier deliveries are currently operating as normal with some delays in a small select number of locations.

We have made arrangements with suppliers to send items direct on a next day service on items that have a 3 day availability and are not on our shelves. These charges are set by our manufacturers and will depend on items ordered and delivery postcode, but should help with clearing backlogs and ensuring deliveries are received quickly if required.

This information may change at any time.

Chemical Resin & Anchors

Show:
Sort By:
  • Spare chemical resin nozzles
  • Fits most single tube chemical resin tubes (please contact if in doubt).
£0.00 Ex Tax: £0.00
  • Applicator gun for chemical resin.
  • Fits 400ml resin cartridges.
£0.00 Ex Tax: £0.00
  • A 3;1 pure Epoxy resin with high load capacities.
  • The Epoxy Resin is a 2 Part, 3:1 ratio, injection system suitable for use in concrete, solid brick and most natural stone.
  • When used with Grade 8.8 Studs or Stainless Steel grade A4/70 studs it provides a very high strength anchorage suitable for use in dry and wet conditions.
£0.00 Ex Tax: £0.00
  • Epoxy Acrylate is suitable for use in concrete, brickwork and most natural stone.
  • It can be used in dry, wet and flooded holes.
  • The Epoxy Acrylate 2 part injection resin is suitable for use in solid concrete, solid brickwork and natural stone as well as hollow materials using a suitable sleeve.
£0.00 Ex Tax: £0.00
  • Polyester 300 styrene free resin is a general purpose resin suitable for brickwork, most natural stone and brickwork.
  • It can be used in dry and wet holes.
  • The polyester styrene free 2 part injection resin is suitable for use in solid concrete, solid brickwork and natural stone as well as hollow materials using a suitable sleeve.
£0.00 Ex Tax: £0.00
  • Polyester resin is a general purpose resin suitable for brickwork, most natural stone and concrete.
  • The Polyester 2 Part injection resin is suitable for use in solid concrete, solid brickwork and natural stone as well as hollow materials using a suitable sleeve.
£0.00 Ex Tax: £0.00
  • The Polyester Styrene Free 2 Part injection resin is suitable for use in solid concrete, solid brickwork and natural stone as well as hollow materials using a suitable sleeve.
  • It can be used for installing threaded studs, rebar or internal threaded sockets.
£0.00 Ex Tax: £0.00
  • A fast cure or winter grade injection resin which cures down to -10 degrees centigrade.
  • The Vinylester 2 Part injection resin is suitable for use in solid concrete, solid brickwork and natural stone as well as hollow materials using a suitable sleeve.
  • It can be used for installing threaded studs, rebar or internal threaded sockets.
£0.00 Ex Tax: £0.00
JF150P Polyester Styrene Free Injestion Resin 150ml (Pack of 12) 3 Days
  • The Polyester Styrene Free 2 Part injection resin is suitable for use in solid concrete, solid brickwork and natural stone as well as hollow materials using a suitable sleeve.
  • It can be used for installing threaded studs, rebar or internal threaded sockets.
£71.38 Ex Tax: £59.48
JF300E 300ml Pure Epoxy Injection Resin (1 Tube) Out Of Stock
  • Pure epoxy resin is a two part red resin with a 3:1 ratio suitable for use in the vast majority of base materials.
  • It can be used for installing threaded studs, rebar or internal threaded sockets for structural applications including columns, guard raills, facades, staircases, silo installations, machines and cantilever beams.

 

£9.79 Ex Tax: £8.16
JF380PSF Polyester Styrene Free Injestion Resin 410ml (Pack of 12) 3 Days
  • The Polyester Styrene Free 2 Part injection resin is suitable for use in solid concrete, solid brickwork and natural stone as well as hollow materials using a suitable sleeve.
  • It can be used for installing threaded studs, rebar or internal threaded sockets.
£92.94 Ex Tax: £77.45
  • TIK Resin Fix is a high performance chemical resin.
  • Suitable for use in concrete, brickwork and stone.
  • Fast curing two-part chemical anchoring.
  • Suitable for fixing wall ties, starter bars, studs and bolts.
  • The system is based on unsaturated Polyester.
  • Suitable for close edge fixings.
£0.00 Ex Tax: £0.00
  • High Tensile Grade 8.8 zinc and yellow passivated to 5 microns studs for use with J-Fix Glass Spin In Capsules or J-Fix Injection Resin Systems, supplied complete with nut and washer.
  • The studs have external hexagon drive units with one drive unit in each box.
  • Each stud has a depth mark to indicate correct setting depth and a chisel point to facilitate appropriate mixing when using glass spin in capsules.
£0.00 Ex Tax: £0.00
  • Hot dipped galvanised to a minimum of 42 microns, the J-Fix galvanised studs are for use with J-Fix glass spin In capsules or J-Fix injection resin systems, supplied complete with nut and washer.
  • The studs have external hexagon drive units with one drive unit in each box.
£0.00 Ex Tax: £0.00
  • Grade A4/316 Stainless Steel Studs for use with J-Fix Glass Spin In Capsules or J-Fix Injection Resin Systems, supplied complete with nut and washer.
  • The studs have external hexagon drive units with one drive unit in each box.
  • Each stud has a depth mark to indicate correct setting depth and a chisel point to facilitate appropriate mixing when using glass spin in capsules.
£0.00 Ex Tax: £0.00
  • Grade 5.8 zinc and clear passivated to 5 microns studs for use with J-Fix Glass Spin In Capsules or J-Fix Injection Resin Systems, supplied complete with nut and washer.
  • The studs have external hexagon drive units with one drive unit in each box.
£0.00 Ex Tax: £0.00
  • Grade A2/304 Stainless Steel Studs for use with J-Fix Glass Spin In Capsules or J-Fix Injection Resin Systems, supplied complete with nut and washer.
  • The studs have external hexagon drive units with one drive unit in each box.
£0.00 Ex Tax: £0.00
  • The Epoxy Acrylate, Hammer In Capsules are suitable for use in solid concrete and natural stone.
  • They can be used with reinforcing bar or threaded rods and can achieve high loads by using two capsules at double embedment depth.
£0.00 Ex Tax: £0.00
  • Grade A2/304 Stainless Steel Studs for use with J-Fix Glass Spin In Capsules or J-Fix Injection Resin Systems, supplied complete with nut and washer.
  • The studs have external hexagon drive units with one drive unit in each box.
£0.00 Ex Tax: £0.00
  • Grade 5.8 zinc and clear passivated to 5 microns studs for use with J-Fix Glass Spin In Capsules or J-Fix Injection Resin Systems, supplied complete with nut and washer.
  • The studs have external hexagon drive units with one drive unit in each box.
£0.00 Ex Tax: £0.00
Injection Resin Cleaning Brushes - M30
£0.00 Ex Tax: £0.00
  • A range of nylon and metal sleeves to enable the use of J-Fix injection systems in hollow blocks and bricks.
£0.00 Ex Tax: £0.00
  • A permanent threaded socket for use with glass capsules or the J-Fix injection resin systems.
  • The internal threaded socket provides a flush fixing which allows for the attachment of a suitable bolt or threaded rod.
  • Available in zinc plated or stainless steel versions.
£0.00 Ex Tax: £0.00
  • A permanent socket for use with glass capsules or J-Fix injection resin systems.
  • The internal threaded sockets provide a flush fixing which allows for the attachment of a suitable bolt or threaded rod.
  • Available in zinc or stainless steel.
£0.00 Ex Tax: £0.00