Drill Bits - Metal

Drill Bits - Metal
Show:
Sort By:
CarbideMax  40  TCT  Magnet  Broach  Cutters New
  • The CarbideMax 40 series will broach up to 35mm thickness of metal.
  • Up to 4x longer life and 15% faster cut than HSS cutters.
  • One of the hardest cutting tools, Tungsten Carbide is capable of drilling through the toughest steels.
£0.00 Ex Tax: £0.00
CarbideMax  55  TCT  Magnet  Broach  Cutters New
  • The CarbideMax 55 Series will broach up to 50mm thickness of metal.
  • Up to 4x longer life and 15% faster cut than HSS cutters.
  • One of the hardest materials used for cutting tools, Tungsten Carbide, is capable of drilling through the hardest steels.
  • HMT CarbideMax TCT Broach cutters are tipped with individually brazed cutting teeth of the highest quality carbide.
  • They are designed with an elaborate cutting geometry which results in faster, quieter, easier drilling and chatter free performance.
  • Furthermore, because the teeth of the cutter are doing all of the hard work, less strain is put on the wall of the cutter.
  • Therefore a thinner wall thickness is required meaning less material is removed resulting in a substantially faster cut.
£0.00 Ex Tax: £0.00
  • Patented Drill Point - 50% Faster Drilling with 30% less presure.
  • Incredible Finished Hole quality.
  • Instant drill start with no slipping.
  • No snatch when drill bit breaks through.
  • Fantastic Tool Life.
  • Fully Impact Rated on structural steel
£0.00 Ex Tax: £0.00
  • HSS drill bits are hard and much more resistant to heat than high-carbon steel.
  • Used to drill metal, hardwood and most other materialsat greater cutting speeds than carbon steel bits. 
£0.00 Ex Tax: £0.00
HSS 19 Piece Metric Drill Set 1-10mm 3 Days
HSS 19 Piece Metric Drill Set 1-10mm ..
£13.38 Ex Tax: £11.15
Ultra  Coated  CarbideMax  55  TCT  Cutters New
  • CarbideMax Ultra cutters are specifically designed for the toughest broaching jobs on the planet, including Hardox steel.
  • Succesful results machining these materials requires the right combination of equipment including high torque/slow speed, geared Magnet Drill, like the HMT MAX100 Magnet Drill and plently of BioCut Blue lubricant.
  • Patience and experience is essential to get the best results with these materials including allowing the cutter to cool during the cut to avoid overheating and damaging the cutting tips.
£0.00 Ex Tax: £0.00
  • The best long-life twist drill bits for metal.All VersaDrive Drill Bits can be used in any standard 1/2in drill chuck for cordless or pistol drill use, or adapted for use in a Magnet Drill or Impact Wrench.
  • Fast drilling with minimal kickback; dual hardened for impact wrench use up to 10mm.
  • Precision Ground Flutes; with deep web design for easy chip clearance.
  • 135 degree split point for easy starting and high accuracy.
  • 8% Cobalt for long life and endurance in structural steel and hard metals. GoldMax Low Friction Titanium Coating to stop heat burn out.
  • High Strength, Non-Slip Shank Design.
£0.00 Ex Tax: £0.00
  • The best long-life twist drill bits for metal.All VersaDrive Drill Bits can be used in any standard 1/2in drill chuck for cordless or pistol drill use, or adapted for use in a Magnet Drill or Impact Wrench.
  • Fast drilling with minimal kickback; dual hardened for impact wrench use up to 10mm.
  • Precision Ground Flutes; with deep web design for easy chip clearance.
  • 135 Split Point for easy starting and high accuracy.
  • 8% Cobalt for long life and endurance in structural steel and hard metals. GoldMax Low Friction Titanium Coating to stop heat burn out.
  • High Strength, Non-Slip Shank Design.
£0.00 Ex Tax: £0.00
  • Fast, smooth drilling with miminal kickback; Specially hardened for impact wrench use.
  • Precision ground flutes with deep web design for easy chip clearance.
  • 135 degree SPLIT point angle for easy starting and high accuracy
  • 8% Cobalt for long life and endurance in structural steel and hard metals.
  • Goldmax low-friction titanium coating to stop heat burn-out.
  • High strength, non-slip shank design.
£0.00 Ex Tax: £0.00
  • 5% cobalt-alloyed jobber drills with high heat resistance for drilling steels with tensile strength over 800 Nm2, specially suitable for high alloyed steels, bearing steels, hot/cold rolled steel.
  • Ideal for stainless steel.
£0.00 Ex Tax: £0.00
  • HSS twist drill: toughness and precision combined with excellent cutting efficiency for drilling alloyed carbon and plain steel.
  • Ideal for hand held operations.
£0.00 Ex Tax: £0.00
  • HSS twist drill: toughness and precision combined with excellent cutting efficiency for drilling alloyed carbon and plain steel.
  • Ideal for hand held operations.
£0.00 Ex Tax: £0.00
  • Extremely versatile and precise drilling in various materials.
  • For precision rotary drilling in tiles, natural stone, metal, wood and plastic.
£0.00 Ex Tax: £0.00
  • HSS twist drill: toughness and precision combined with excellent cutting efficiency for drilling alloyed carbon and plain steel.
  • Ideal for hand held operations.
£0.00 Ex Tax: £0.00