Drill Bits & Holesaws

Drill Bits & Holesaws
Show:
Sort By:
10mm A/F Hex Magnetic Bit Driver (Pack of 10) 3 Days
10mm A/F Hex Magnetic Bit Driver (Pack of 10) ..
£201.77 Ex Tax: £168.14
5, 6, and 8mm Tile / Glass Drill 3 Days
5, 6, and 8mm Tile / Glass Drill ..
£5.84 Ex Tax: £4.87
6 Piece Woodspade Flat Bit Set 10-25mm 3 Days
6 Piece Woodspade Flat Bit Set 10-25mm ..
£8.65 Ex Tax: £7.21
7 Piece Masonry Drill Bit Set 3 Days
7 Piece Masonry Drill Bit Set ..
£4.76 Ex Tax: £3.97
  • Abracs's holesaws are manufactured using bi-metal hole saw engineering and use only the premium quality materials to give exceptionally strong and durable performance.
    £0.00 Ex Tax: £0.00
    • Auger bits include a rotating helical screw blade that acts as a conveyor ot remove drilled out material.
    • The blade rotation causes the material to move out of the hole being drilled.  
    £0.00 Ex Tax: £0.00
    CarbideMax  40  TCT  Magnet  Broach  Cutters New
    • The CarbideMax 40 series will broach up to 35mm thickness of metal.
    • Up to 4x longer life and 15% faster cut than HSS cutters.
    • One of the hardest cutting tools, Tungsten Carbide is capable of drilling through the toughest steels.
    £0.00 Ex Tax: £0.00
    CarbideMax  55  TCT  Magnet  Broach  Cutters New
    • The CarbideMax 55 Series will broach up to 50mm thickness of metal.
    • Up to 4x longer life and 15% faster cut than HSS cutters.
    • One of the hardest materials used for cutting tools, Tungsten Carbide, is capable of drilling through the hardest steels.
    • HMT CarbideMax TCT Broach cutters are tipped with individually brazed cutting teeth of the highest quality carbide.
    • They are designed with an elaborate cutting geometry which results in faster, quieter, easier drilling and chatter free performance.
    • Furthermore, because the teeth of the cutter are doing all of the hard work, less strain is put on the wall of the cutter.
    • Therefore a thinner wall thickness is required meaning less material is removed resulting in a substantially faster cut.
    £0.00 Ex Tax: £0.00
    CarbideMax  Standard  Weldon  Shank  Extension  Arbor New
    • High quality 100mm extension arbor for improving access to deep drilling applications.
    • Extended pilot pin may be needed.
    • Can be mounted in series for extreme depth applications.
    • 35mm diameter.
    £0.00 Ex Tax: £0.00
    CarbideMax 40  Weldon  Shank  Morse  Taper  Arbor  19.05mm New
    • With the requirement for ultra large diameter broaching fast increasing, HMT have launched the CarbideMax-XL range of Tungsten Carbide Tipped cutters from 65 right up to 150mm diameter with 55mm cutting depth as standard.
    • These high quality TCT cutters have a reinforced 32mm diameter shank to withstand the high levels of torque generated.
    • Large diameter broaching has its own unique challenges relating to correct machine size, RPM, lubricant and feed rates.
    • Contact our sales team to discuss your particular application.
    £0.00 Ex Tax: £0.00
    • Manufactured using tool grade steel and premium quality diamond grain. 150mm length with a 10mm diamond segment set into the metal core. Excellent working life, speed and performance. Kit contains the 5 most popular sizes plus a full range of accessories and is supplied in a sturdy and secure aluminium case.
    • 5 Dry Diamond Cores - sizes 42mm, 52mm, 65mm, 117mm, 127mm
    • Accessories - Chuck Adaptor, SDS Adaptor, Universal Extension, Guide Rod, Drift Key, Masonry Bit, Aluminium Trolley Case
    £0.00 Ex Tax: £0.00
    • Patented Drill Point - 50% Faster Drilling with 30% less presure.
    • Incredible Finished Hole quality.
    • Instant drill start with no slipping.
    • No snatch when drill bit breaks through.
    • Fantastic Tool Life.
    • Fully Impact Rated on structural steel
    £0.00 Ex Tax: £0.00
    HMT Magnet Drill Arbor Extension 100mm with pilot pin spring Out Of Stock
    • A unique magnet drilling extension accessory developed specifically for use in extreme depth drilling applications, where multiple extension arbors are mounted in series to achieve the required drilling depth.
    • Traditionally this application meantit was not possible to use a pilot pin with your broach cutter, leading to drilling instability. However, the retractable spring-loaded extension arboris designed to be used at the bottom of a series of extension arbors, meaning a standard pilot pin can be used with the broach cutter and used in normal operation, like with a standard spring loaded magnet drill arbor.
    • 35mm diameter.
    £122.70 Ex Tax: £102.25
    HMT VersaDrive HD Quick Change Impact Adapter 1/2in Drive Out Of Stock
    The new VersaDrive HD impact wrench adapter has been developed to work with the latest genera..
    £71.94 Ex Tax: £59.95
    HMT VersaDrive Impact Driver 1/4in Adapter Out Of Stock
    High quality 1/4in impact driver adapter for use with all standard 1/4in drive impact wrenche..
    £26.82 Ex Tax: £22.35
    • HSS drill bits are hard and much more resistant to heat than high-carbon steel.
    • Used to drill metal, hardwood and most other materialsat greater cutting speeds than carbon steel bits. 
    £0.00 Ex Tax: £0.00
    HSS 19 Piece Metric Drill Set 1-10mm 3 Days
    HSS 19 Piece Metric Drill Set 1-10mm ..
    £13.38 Ex Tax: £11.15
    • Masonry drill bit for drilling in bricks and masonry.
    • Parallel round shank.
    £0.00 Ex Tax: £0.00
    • SDS plus auger bits.
    • Can be used in both electric power drills and hand braces.
    • With a single cutting edge for easy regrinding, though the need for regrinding is reduced as it is made from hardened tool steel for a longer cutting life.
    • The threaded tip moderates a self-feed.
    £0.00 Ex Tax: £0.00
    • SDS-plus high performance drill bit with four tungsten carbide cutting edges.
    • Suitable for drilling in concrete, natural stone and masonry.
    £0.00 Ex Tax: £0.00
    Ultra  Coated  CarbideMax  55  TCT  Cutters New
    • CarbideMax Ultra cutters are specifically designed for the toughest broaching jobs on the planet, including Hardox steel.
    • Succesful results machining these materials requires the right combination of equipment including high torque/slow speed, geared Magnet Drill, like the HMT MAX100 Magnet Drill and plently of BioCut Blue lubricant.
    • Patience and experience is essential to get the best results with these materials including allowing the cutter to cool during the cut to avoid overheating and damaging the cutting tips.
    £0.00 Ex Tax: £0.00
    Ultra  Coated  Versadrive  TCT  Holesaws New
    • The CarbideMax Ultra coating is specifically designed for the toughest countersinking jobs on the planet, including Hardox steel
    • Succesful results machining these materials requires the right combination of equipment including high torque/slow speed, geared Magnet Drill, like the HMT MAX100 Magnet Drill and BioCut Blue lubricant. Patience and experience is essential to get the best results with these materials including allowing the cutter to cool during the cut to avoid overheating and damaging the cutting tips.
    • The MultiSink is a worldwide unique new Combination Countersink Tool designed and developed by HMT for use with Magnetic Drills, allowing the user to combine the tool with the VersaDrive product range to Broach & Countersink, Drill & Countersink, Tap & Countersink or even Drill, Tap & Countersink in one operation - providing huge time-saving benefits.
    £0.00 Ex Tax: £0.00
    • SDS + masonry drill bits.
    • Used for drilling into hard materials with minimal effort.
    • Ideal for use in brick and concrete.
    £0.00 Ex Tax: £0.00
    • Fast efficient countersinking & deburring.
    • 90 Degree point angle for Countersunk Bolt Heads.
    • Safer use with minimal kickback; specially hardened for impact wrench use.
    • High-Grade Tool Steel with ground flutes for high accuracy & long life.
    • GoldMax low friction Titanium Coating to stop heat burn out.
    • High Strength, Non-slip shank design.
    • Can be used with an impact wrench up to 16.5mm diameter.
    £0.00 Ex Tax: £0.00