Steelwork Fixings

Steelwork Fixings
Show:
Sort By:
  • The Type AAF is Lindapter's flagship product, which is an adjustable version of the popular Type AF.
  • This steelwork fixing connection is an innovative 2-part design that self-adjusts to suit a range of flange thicknesses.
  • The low temperature SG iron provides resistance in cold environments where impact strength is important.
£0.00 Ex Tax: £0.00
  • Adapter washer used to fill the recess of the type AF high Friction Clamp.
  • Additionally it features two projections which, when the AFW is inverted, will captivate the larger hexagons of 10.9 bolts.(M12 � M20 only).
£0.00 Ex Tax: £0.00
  • Adapter washer used to fill the recess of the type AF high Friction Clamp.
  • Additionally it features two projections which, when the AFW is inverted, will captivate the larger hexagons of 10.9 bolts.(M12 � M20 only).
£0.00 Ex Tax: £0.00
  • Packing used to adjust the tail length of the AF High Friction clamps to meet differing beam flange thicknesses.
£0.00 Ex Tax: £0.00
  • Packing used to adjust the tail length of the AF High Friction clamps to meet differing beam flange thicknesses.
£0.00 Ex Tax: £0.00
  • Packing used to adjust the tail length of the AF High Friction clamps to meet differing beam flange thicknesses.
£0.00 Ex Tax: £0.00
  • Packing used to adjust the tail length of the AF High Friction clamps to meet differing beam flange thicknesses.
£0.00 Ex Tax: £0.00
  • Packing used to adjust the tail length of the AF High Friction clamps to meet differing beam flange thicknesses.
£0.00 Ex Tax: £0.00
  • The Type CF allows a fast steelwork fixing connection.
  • It is a high friction clamp which hooks over flanges of I-beams, angles and channels.
    • Lindapter markings act as a unique anti-rotation device.
    • Can be combined with all Lindapter Girder Clamp products including Type AF.
£0.00 Ex Tax: £0.00
  • Adjustable clamp incorporating a setscrew tail to accommodate a wide range of flange thicknesses.
  • The type D2 has a recessed head to hold the bolt head captive.
  • The skirt prevents the clamp rotating during installation.
  • Suitable for flanges up to 5 degrees.
£0.00 Ex Tax: £0.00
  • A two part flange clamp with large clamping range.
  • The bolt can be substituted with either drop rod or J bolts.
  • For parallel flanges only.
£0.00 Ex Tax: £0.00
  • Flange Clamp for connecting all types of parallel running steelwork with flanges of the same width.
  • Can be used with bolts or alternatively with threaded rod.
  • Not suitable for tapered flanges.
£0.00 Ex Tax: £0.00
  • The Flush Clamp is a Girder Clamp System without the need of a location plate.
  • Suitable for connecting beams of varying widths and thicknesses.
  • Suitable for flanges up to 10 degree slope.
£0.00 Ex Tax: £0.00
  • Self adjusting clamp for various flange thicknesses and slopes upto 15 degrees.
  • The leg of the saddle prevents the clamp rotating during installation.
  • The LR tail spans slotted holes.
£0.00 Ex Tax: £0.00
  • Self adjusting clamp for various flange thicknesses and slopes up to 10 degrees.
  • The special serrations on the tail prevent the clamp rotating during installation.
  • The LS tail spans over slotted holes.
£0.00 Ex Tax: £0.00
  • Type A clamp allows a fast steelwork fixing connection.
  • It has a recessed top to hold the bolt head captive whilst the nut is tightened.
  • The skirt prevents the clamp rotating during installation.
  • Suitable for flanges up to 8 degrees.
£0.00 Ex Tax: £0.00
  • Type A clamp allows a fast steelwork fixing connection.
  • It has a recessed top to hold the bolt head captive whilst the nut is tightened.
  • The skirt prevents the clamp rotating during installation.
  • Suitable for flanges up to 8 degrees.
£0.00 Ex Tax: £0.00
  • Type B allows a fast steelwork fixing connection without the need for onsite drilling or welding.
  • It is a steelwork clamp with flat top which allows the bolt head or nut to be rotated.
  • Suitable for use with all bolts, studs, tie rods and J-bolts, and flanges up to 8 degrees.
£0.00 Ex Tax: £0.00
  • Type B allows a fast steelwork fixing connection without the need for onsite drilling or welding.
  • It is a steelwork clamp with flat top which allows the bolt head or nut to be rotated.
  • Suitable for use with all bolts, studs, tie rods and J-bolts, and flanges up to 8 degrees.
£0.00 Ex Tax: £0.00
  • Packing used to adjust the tail length of various steelwork clamps (see related components) to meet differing beam flange thicknesses.
£0.00 Ex Tax: £0.00
  • Packing used to adjust the tail length of various steelwork clamps (see related components) to meet differing beam flange thicknesses.
£0.00 Ex Tax: £0.00