We will be closing for the Christmas break on the 21st December 2018 and re-opening on the 2nd January 2019.

For guaranteed delivery this year, orders need to be placed by 4.30pm on Wednesday 19th December. Orders after this date may not be delivered until 2019.

Lindapter Products

Lindapter Products
Show:
Sort By:
  • The original threaded stud expansion bolt.
  • Self heading bolt suitable for fixing to hollow-sections, tubes and applications where access is available from one side only.
  • The Lindibolt uses a standard clearance hole.
£0.00 Ex Tax: £0.00
  • Self adjusting clamp for various flange thicknesses and slopes upto 15 degrees.
  • The leg of the saddle prevents the clamp rotating during installation.
  • The LR tail spans slotted holes.
£0.00 Ex Tax: £0.00
  • Self adjusting clamp for various flange thicknesses and slopes up to 10 degrees.
  • The special serrations on the tail prevent the clamp rotating during installation.
  • The LS tail spans over slotted holes.
£0.00 Ex Tax: £0.00
  • The Type MF is designed for MetFloor 60 & Metfloor 80 profiles manufactured by Composite Metal Flooring (CMF).
£0.00 Ex Tax: £0.00
  • The Multiwedge 2 is designed for Multideck 60 and Multideck 80 profiles manufactured by Kingspan Structural Products./ul>
£0.00 Ex Tax: £0.00
  • The Type TC, Toggle Clamp is designed for service suspension from pre-cast hollow core slabs (minimum depth of core 75mm) as well as Structural Hollow Section (SHS), steel sheeting or purlins.
£0.00 Ex Tax: £0.00
  • The Type TR60 is designed for TR60+ and TR80+ profiles manufactured by Structural Metal Decks.
£0.00 Ex Tax: £0.00
  • Type A clamp allows a fast steelwork fixing connection.
  • It has a recessed top to hold the bolt head captive whilst the nut is tightened.
  • The skirt prevents the clamp rotating during installation.
  • Suitable for flanges up to 8 degrees.
£0.00 Ex Tax: £0.00
  • Type A clamp allows a fast steelwork fixing connection.
  • It has a recessed top to hold the bolt head captive whilst the nut is tightened.
  • The skirt prevents the clamp rotating during installation.
  • Suitable for flanges up to 8 degrees.
£0.00 Ex Tax: £0.00
  • Type B allows a fast steelwork fixing connection without the need for onsite drilling or welding.
  • It is a steelwork clamp with flat top which allows the bolt head or nut to be rotated.
  • Suitable for use with all bolts, studs, tie rods and J-bolts, and flanges up to 8 degrees.
£0.00 Ex Tax: £0.00
  • Type B allows a fast steelwork fixing connection without the need for onsite drilling or welding.
  • It is a steelwork clamp with flat top which allows the bolt head or nut to be rotated.
  • Suitable for use with all bolts, studs, tie rods and J-bolts, and flanges up to 8 degrees.
£0.00 Ex Tax: £0.00
  • Packing used to adjust the tail length of various steelwork clamps (see related components) to meet differing beam flange thicknesses.
£0.00 Ex Tax: £0.00
  • Packing used to adjust the tail length of various steelwork clamps (see related components) to meet differing beam flange thicknesses.
£0.00 Ex Tax: £0.00
  • The V-Nut fits the re-entrant channel of several composite floor deckings.
  • Including: R51 (SMD), ComFlor 51 (Tata Steel),Holorib (Hare Decking), Superib (Hare Decking), Multideck 50 (Kingspan) and MetFloor 55 (CMF)
£0.00 Ex Tax: £0.00
  • The Webfix � WF for a quick installation directly from the web of Zed purlins.
£0.00 Ex Tax: £0.00
  • A purlin clip to suit a large range of purlin sections.
  • Can be used with type SW � Swivel Unit for use on inclined purlins.
£0.00 Ex Tax: £0.00