OO M16x50 Hex Head Set Screw Galvanised
Our trade counter is now back open with some restrictions.

Courier deliveries are currently operating as normal.

We still have arrangements in place with suppliers to send items direct on a next day service on items that have a 3 day availability and are not on our shelves. The charges for this are set by our manufacturers and will depend on items ordered and delivery postcode.


M16x50 Hex Head Set Screw Galvanised


M16x50  Hex  Head  Set  Screw  Galvanised
  • These set screws are made from grade 8.8 steel.
  • Galvanised for increased resistance to corrosion.
  • They are fully threaded and conform to DIN 933 standards.
  • Can be used with many nut types and washers.

Scroll down for further product information...

When out of stock, any availability times are estimates and dependent upon supplier stock. Items without a lead time have no confirmed status and may take up to 12 weeks to arrive.

Next day delivery is available on items marked with a *.


ImageProduct + Brand: PriceAvailabilityQty

M16x50 Hex Head Set Screw Galvanised (Pack of 1) [Grade 8.8]


Part No: M16-050S-G

TIK Products

£0.71
Excl VAT: £0.59
29 Packs
In Stock

M16x50 Hex Head Set Screw Galvanised (Pack of 10) [Grade 8.8]


Part No: FM16-050S-G10

TIK Products

£8.60
Excl VAT: £7.17
1000 Packs
In Stock

M16x50 Hex Head Set Screw Galvanised (Pack of 25) [Grade 8.8]*


Part No: FM16-050S-G

Fixings Megastore

£9.83
Excl VAT: £8.19
400 Packs
In Stock

M16x50 Hex Head Set Screw Galvanised (Pack of 25) [Grade 8.8]


Part No: HX16-050S-G

HX Fixings

£10.16
Excl VAT: £8.47
3 Days
  • These set screws are made from grade 8.8 steel.
  • Galvanised for increased resistance to corrosion.
  • They are fully threaded and conform to DIN 933 standards.
  • Can be used with many nut types and washers.


APPLICATION:
For fastening together numerous types of material or to be fastened in to pre-tapped holes.
Widely used in many engineering applications.

Galvanised coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Galvanising is a plating that (in contrast to iron oxide) does not trigger a breakdown of the substrates surface integrity as it is formed. The galvanising, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.

Fastener Specifications
Head TypeHexagon Head
Bolt Diameter16mm
Fixing Length50mm
Thread Length50mm
Bolt Head Height10mm
Thread TypeMetric Coarse
Thread Pitch2mm
Bolt FinishGalvanised
Material Grade8.8 High Tensile
Spanner Size24mm
Bolt SpecificationDIN 933