Our trade counter is now back open with some restrictions.

Face masks are required for entering the store. These are also available for purchase for 50p each.

Alternatively, place your order by phone and when we arrive we will come down and serve you directly from your car.
Fixings & Fastenings

Plastic Products

Plastic Products
Show:
Sort By:
  • Hinge Design allows for repeated opening and closing with 360 degree retention.
  • High stand off allows for lagging and heat circulation.
  • Capable of withstanding continuous working temps of 110 degree C and short term temperatures as high as 140 degree C.
£0.00 Ex Tax: £0.00
  • These white, super secure, heat stabilised polypropylene clips have a large base design which prevents the base being pulled into plaster and resists side loads.
  • The design also allows pipes to be easily removed without the need to loosen or remove screws.
  • They also have a high stand off allowing for lagging and heat circulation and are capable of withstanding continuous working temperatures of 110 degrees C and can also withstand short term temperatures as high as 140 degrees C.
£0.00 Ex Tax: £0.00
  • Avoids the need to make good around pipework.
  • Can be fitted to existing pipework.
£0.00 Ex Tax: £0.00
  • Hardened extra length pins.
  • Pins will drive into plasterboard and masonry.
  • Internal grips hold the cable in place.
  • Countersunk pin holder avoids splitting.
  • Can accept a No.6-No.8 woodscrew if required
£0.00 Ex Tax: £0.00
  • Economical and an easy way to fix pipes to walls and timber.
  • Hardened masonry nail.
  • Made from heavy grade plastic.
£0.00 Ex Tax: £0.00
  • These round cable clips have hardened masonry nails for increased efficiency, and which will fix into timber, block work and mortar.
  • The nail should not be hammered directly in brick, and fixing into mortar is recommended.
£0.00 Ex Tax: £0.00
  • Form A flat washers are thicker than the more popular form B type washers.
  • They are manufactured from natural nylon.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • Form A flat washers are thicker than the more popular form B type washers.
  • They are manufactured from natural nylon.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • Form A flat washers are thicker than the more popular form B type washers.
  • They are manufactured from natural nylon.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • Form A flat washers are thicker than the more popular form B type washers.
  • They are manufactured from natural nylon.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • Form A flat washers are thicker than the more popular form B type washers.
  • They are manufactured from natural nylon.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • Form A flat washers are thicker than the more popular form B type washers.
  • They are manufactured from natural nylon.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • Form A flat washers are thicker than the more popular form B type washers.
  • They are manufactured from natural nylon.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • Form A flat washers are thicker than the more popular form B type washers.
  • They are manufactured from natural nylon.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • Form A flat washers are thicker than the more popular form B type washers.
  • They are manufactured from natural nylon.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • Form A flat washers are thicker than the more popular form B type washers.
  • They are manufactured from natural nylon.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • Topats.
  • Black plastic.
£0.00 Ex Tax: £0.00
  • Bolt / nut cover caps.
  • Black or black plastic.
£0.00 Ex Tax: £0.00
  • Bolt / nut cover caps.
  • Black or black plastic.
£0.00 Ex Tax: £0.00
  • Bolt / nut cover caps.
  • Black or black plastic.
£0.00 Ex Tax: £0.00
  • Bolt / nut cover caps.
  • Black or black plastic.
£0.00 Ex Tax: £0.00
  • Bolt / nut cover caps.
  • Black or black plastic.
£0.00 Ex Tax: £0.00
  • Bolt / nut cover caps.
  • Black or black plastic.
£0.00 Ex Tax: £0.00
  • Sealing covers.
  • Black plastic.
£0.00 Ex Tax: £0.00