TIK Products

Show:
Sort By:
200mm Brenton Padbolts 2A Galvanised..
£3.90 Ex Tax: £3.25
150mm Butt Hinges Zinc Plated (Sold As Singles)..
£2.50 Ex Tax: £2.08
150mm Cabin Wire Hooks..
£1.00 Ex Tax: £0.83
200mm Premier Brenton Padbolts HS Galvanised..
£8.36 Ex Tax: £6.97
300mm Medium Brenton Padbolt..
£2.39 Ex Tax: £1.99
  • Spare chemical resin nozzles
  • Fits most single tube chemical resin tubes (please contact if in doubt).
£0.00 Ex Tax: £0.00
  • Applicator gun for chemical resin.
  • Fits 400ml resin cartridges.
£0.00 Ex Tax: £0.00
M10 Dome Nuts Zinc Plated (Pack of 10) Out Of Stock
  • Dome nuts provide a more aesthetically pleasing finish to a standard nut.
  • Bright zinc plated CR3+ DIN1587.
£1.99 Ex Tax: £1.66
  • An internally threaded socket anchor for use with bolts or threaded rod of any length.
  • May be set flush or at a depth.
  • Full expansion can be guaranteed by using the correct shouldered setting punch.
  • Suitable for use in concrete.
  • The drop in anchor is a deformation controlled anchor for use in solid concrete.
  • It has an internal thread suitable for attaching threaded studs and bolts.
£3.98 Ex Tax: £3.32
  • Form A flat washers are thicker than the more popular form B type washers.
  • They are brass and conform to DIN125 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£3.44 Ex Tax: £2.87
  • Form A flat washers are thicker than the more popular form B type washers.
  • They are galvanised for increased resistance to corrosion, and conform to DIN125 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£1.18 Ex Tax: £0.98
Form A flat washers are thicker than the more popular form B type washers.They are manufactured from..
£0.06 Ex Tax: £0.05
  • Form A flat washers are thicker than the more popular form B type washers.
  • They are stainless steel for resistance to corrosion, and conform to DIN125 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£1.18 Ex Tax: £0.98
  • Form A flat washers are thicker than the more popular form B type washers.
  • They are zinc plated for resistance to corrosion, and conform to DIN125 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£1.03 Ex Tax: £0.86
  • Form B flat washers are thinner than the heavier duty form A type washers.
  • They are brass and conform to DIN125 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£2.48 Ex Tax: £2.07
  • Form B flat washers are thinner than the heavier duty form A type washers.
  • They are zinc plated for resistance to corrosion, and conform to BS4320 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.84 Ex Tax: £0.70
  • Form C flat washers.
  • They are zinc plated for resistance to corrosion, and conform to BS4320 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£1.03 Ex Tax: £0.86
M10 Form 'F' Flat Washers Galvanised (Pack of 10) Out Of Stock
  • Form F flat washers.
  • They are galvanised for increased resistance to corrosion, and conform to BS4320 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£1.56 Ex Tax: £1.30
M10 Form 'G' Flat Washers Galvanised (Pack of 10) Out Of Stock
  • Form G flat washers.
  • They are galvanised for increased resistance to corrosion, and conform to BS4320 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£2.03 Ex Tax: £1.69
  • Form G flat washers.
  • They are zinc plated for resistance to corrosion, and conform to BS4320 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£1.64 Ex Tax: £1.37