Nails

Nails
Show:
Sort By:
  • These Makita Galvanised Nails are suitable in the GN900SE First Fix Gas Nailer.
  • Manufactured to Eurocode 5/ EN14592 specifications.
  • £0.00 Ex Tax: £0.00
  • Makita Nail Handi-Packs are ideal for the hire industry.
  • Supplied in a plastic tub that can be re-used.
  • The tub is manufactured from freeze grade plastic so it will not become brittle in cold weather.
  • Manufactured to Eurocode 5/ EN14592 specifications.
  • 1,000 Nails and Gas Cell included.
  • £0.00 Ex Tax: £0.00
  • Paslode IM65a chisel point brads for Impulse IM65A F16 Angled gas brad nailer.
  • Electro galvanised light duty protection F16 gauge lost head 1.65mm wire brads glued, supplied with Paslode Special Impulse gas fuel cells which drives up to 1,000 brads per cell.
  • Electro Galv: Meet the Eurocode 5 requirements for all applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn and chromate minimum 7m.
  • £0.00 Ex Tax: £0.00
  • Paslode IM90 Diamond point RounDrive nails, a unique off-centre 34 degrees Round head Nail pack with paper strip collation, supplied with Paslode Special Impulse gas fuel cells.
  • FINISH :
  • All Paslode nails are Chrome 6, cadmium and lead free and are available in five finishes to meet corrosion requirements.
  • Bright : Economy bright nails meet the Eurocode 5 requirements for applications in service class 1 (indoor) Specification - No coating.
  • Galv Plus : Meet the Eurocode 5 requirements for applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn / Al alloy approx 15m.
  • Electro Galv : Meet the Eurocode 5 requirements for all applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn and chromate minimum 7m.
  • Hot Dipped Galv : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - Zinc coating minimum 50m
  • Stainless Steel : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - A2 according to AISI 304, and A4 according to AISI 316.
  • £0.00 Ex Tax: £0.00
  • Paslode IM65 chisel point brads for Impulse IM65 F16 gas brad nailer.
  • Electro galvanised light duty protection F16 gauge lost head 1.65mm wire brads glued, supplied with Paslode Special Impulse gas fuel cells which drives up to 1,000 brads per cell.
  • Electro Galv: Meet the Eurocode 5 requirements for all applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn and chromate minimum 7m.
  • £0.00 Ex Tax: £0.00
  • Paslode IM65 chisel point brads for Impulse IM65 F16 gas brad nailer.
  • Electro galvanised light duty protection F16 gauge lost head 1.65mm wire brads glued, supplied with Paslode Special Impulse gas fuel cells which drives up to 1,000 brads per cell.
  • Stainless Steel: Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - A2 according to AISI 304, and A4 according to AISI 316.
  • £0.00 Ex Tax: £0.00
  • Paslode IM350Plus Diamond point clipped head Nail packs with paper strip, supplied with Paslode Special Impulse gas fuel cells.
  • FINISH :
  • All Paslode nails are Chrome 6, cadmium and lead free and are available in five finishes to meet corrosion requirements.
  • Bright : Economy and bright nails meet the Eurocode 5 requirements for applications in service class 1 (indoor) Specification - No coating.
  • Galv Plus : Meet the Eurocode 5 requirements for applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn / Al alloy approx 15m.
  • Electro Galv : Meet the Eurocode 5 requirements for all applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn and chromate minimum 7m.
  • Hot Dipped Galv : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - Zinc coating minimum 50m
  • Stainless Steel : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - A2 according to AISI 304, and A4 according to AISI 316.
  • £0.00 Ex Tax: £0.00
  • Paslode IM350Plus Diamond point clipped head Nail packs with paper strip, supplied with Paslode Special Impulse gas fuel cells.
  • FINISH:
  • All Paslode nails are Chrome 6, cadmium and lead free and are available in five finishes to meet corrosion requirements.
  • Bright: Economy and bright nails meet the Eurocode 5 requirements for applications in service class 1 (indoor) Specification - No coating.
  • Galv Plus : Meet the Eurocode 5 requirements for applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn / Al alloy approx 15m.
  • Electro Galv : Meet the Eurocode 5 requirements for all applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn and chromate minimum 7m.
  • Hot Dipped Galv : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - Zinc coating minimum 50m
  • Stainless Steel : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - A2 according to AISI 304, and A4 according to AISI 316.
  • £0.00 Ex Tax: £0.00
  • Paslode IM350Plus Diamond point clipped head Nail packs with paper strip, supplied with Paslode Special Impulse gas fuel cells.
  • FINISH:
  • All Paslode nails are Chrome 6, cadmium and lead free and are available in five finishes to meet corrosion requirements.
  • Bright : Economy and bright nails meet the Eurocode 5 requirements for applications in service class 1 (indoor) Specification - No coating.
  • Galv Plus : Meet the Eurocode 5 requirements for applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn / Al alloy approx 15m.
  • Electro Galv : Meet the Eurocode 5 requirements for all applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn and chromate minimum 7m.
  • Hot Dipped Galv : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - Zinc coating minimum 50m
  • Stainless Steel: Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - A2 according to AISI 304, and A4 according to AISI 316.
  • £0.00 Ex Tax: £0.00
    Paslode 3.1mm x 90mm IM350 Straight Shank Bright Nails 2 200 - 2 x Fuel Cells 3 Days
    Paslode IM350 Plus Diamond point clipped head Nail packs with paper strip, supplied with Paslode Spe..
    £86.41 Ex Tax: £72.01
    Paslode Battery Charger - Ac/dc Adaptor..
    £86.04 Ex Tax: £71.70
    Paslode Impulse Fuel Cell For IM350 1 x 2..
    £42.66 Ex Tax: £35.55
    Paslode In-car Charger Adaptor..
    £15.74 Ex Tax: £13.12