Washers

Washers

Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface. The main purpose of a washer is to distribute the load under a bolt head or the nut face.

Show:
Sort By:
  • Table 3 washers.
  • They are self colour.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • Table 3 washers.
  • They are bright zinc plated.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • Table 3 washers.
  • They are bright zinc plated.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • Table 8 washers.
  • They are bright zinc plated.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • The Delta Protekt washer system consists of a pair of washers with a wedge-locking action, which is a unique method that uses tension instead of friction.
  • The key is the difference in angles. Since the angle A is larger than the angle B , the pair of washers expand more than the corresponding pitch of the thread.
  • The washers positively lock the fastener in a joint which is subjected to extreme vibration or dynamic loads.
  • This unique bolt securing system uses tension to make the bolt self-locking.
£0.00 Ex Tax: £0.00
  • Form A flat washers are thicker than the more popular form B type washers.
  • They are brass nickel plated and conform to DIN125 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • Form A flat washers are thicker than the more popular form B type washers.
  • They are self colour.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • Ringlock washers provide high-quality, user-friendly bolt securing for the most demanding of applications and are ideal for repeated use.
  • The ring locking system guarantees that the two wedge lock washers are always fastened in the correct position with the wedge shaped cams on the inside and the radial teeth on the outside.
  • This means that the bolt locking system is always easy, safe and quick to install, even for non-specialist users.
  • Particularly suitable for dynamic loads – including when lubricants are used.
£0.00 Ex Tax: £0.00
  • Ringlock washers provide high-quality, user-friendly bolt securing for the most demanding of applications and are ideal for repeated use.
  • The ring locking system guarantees that the two wedge lock washers are always fastened in the correct position with the wedge shaped cams on the inside and the radial teeth on the outside.
  • This means that the bolt locking system is always easy, safe and quick to install, even for non-specialist users.
  • Particularly suitable for dynamic loads – including when lubricants are used.
£0.00 Ex Tax: £0.00
  • Table 5 washers.
  • They are self colour.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • Taper washers with a 5 degree slope.
  • Designed to be used underneath nuts with tapered flanges to enable bolt assembly.
  • Self colour.
£0.00 Ex Tax: £0.00
  • Wedge lock nuts provide a high-quality, user-friendly bolt securing system for the most demanding of applications and is ideal for repeated use.
  • The captive and rotary combination of nut and the wedge lock washers makes securing your bolted joints more efficient, effectiveand easier even under the most extreme vibrations and dynamic loads.
£0.00 Ex Tax: £0.00
  • Diamond curved washers.
  • li>
  • Bright zinc plated CR3.
£0.00 Ex Tax: £0.00
  • These plate washers have a larger surface area than most round washers, making them suitable for heavy-duty fastening.
  • They are ideal for use with Carriage Bolts in structural timber fastening applications such as joist work and decking.
  • Self colour .
£0.00 Ex Tax: £0.00
  • Plate washers.
  • Self colour.
  • Square holed plate washers are designed for use with holding down bolts.
£0.00 Ex Tax: £0.00
  • A washer with serrations that extend radially inward or outward to bite into the bearing surface.
  • They can resist rotation more than a plain washer on hard surfaces, as the tension between washer and the surface is applied over a much smaller area.
  • The washers are bright zinc plated for increased corrosion resistance and conform to DIN6797 standards.
£0.00 Ex Tax: £0.00
  • A washer with serrations that extend radially inward or outward to bite into the bearing surface.
  • They can resist rotation more than a plain washer on hard surfaces, as the tension between washer and the surface is applied over a much smaller area.
  • The washers are bright zinc plated for increased corrosion resistance and conform to DIN6797 standards.
£0.00 Ex Tax: £0.00
  • These external shakeproof washers are designed to allow a secure fastening, preventing loosening of the fastener by either movement or vibration.
  • Also known as serrated washers or star washers, they have serrations that extend radially inward and/or outward to bite into the bearing surface.
  • This type of washer is effective as a lock washer when used with a soft substrate, such as aluminium or plastic.
  • The washers are made from stainless steel grade 304 (A2) for increased corrosion resistance and conform to DIN6797 standards.
£0.00 Ex Tax: £0.00
  • These internal shakeproof washers are designed to allow a secure fastening, preventing loosening of the fastener by either movement or vibration.
  • Also known as serrated washers or star washers, they have serrations that extend radially inward and/or outward to bite into the bearing surface.
  • This type of washer is effective as a lock washer when used with a soft substrate, such as aluminium or plastic.
  • The washers are made from stainless steel grade 304 (A2) for increased corrosion resistance and conform to DIN6797 standards.
£0.00 Ex Tax: £0.00
  • These internal shakeproof washers are designed to allow a secure fastening, preventing loosening of the fastener by either movement or vibration.
  • Also known as serrated washers or star washers, they have serrations that extend radially inward and/or outward to bite into the bearing surface.
  • This type of washer is effective as a lock washer when used with a soft substrate, such as aluminium or plastic.
  • The washers are made from stainless steel grade 304 (A2) for increased corrosion resistance and conform to DIN6797 standards.
£0.00 Ex Tax: £0.00
  • These external shakeproof washers are designed to allow a secure fastening, preventing loosening of the fastener by either movement or vibration.
  • Also known as serrated washers or star washers, they have serrations that extend radially inward and/or outward to bite into the bearing surface.
  • This type of washer is effective as a lock washer when used with a soft substrate, such as aluminium or plastic.
  • The washers are made from stainless steel grade 304 (A2) for increased corrosion resistance and conform to DIN6797 standards.
£0.00 Ex Tax: £0.00
  • Taper washers.
  • Designed to be used underneath nuts with tapered flanges to enable bolt assembly.
  • Self colour.
£0.00 Ex Tax: £0.00
  • Form A flat washers are thicker than the more popular form B type washers.
  • They are manufactured from stainless steel grade 304 (A2) or 316 (A4) for resistance to corrosion, and conform to DIN125 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00