Washers - Zinc Plated

Washers - Zinc Plated

Our range of washer products has a product for any requirement.  If you are looking for a standard round washer, please select the "Flat Washers Form A Zinc Plated" option as this is the standard flat washer suitable for most applications.


Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrates surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.

Show:
Sort By:
  • Table 3 washers.
  • They are bright zinc plated.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • Table 3 washers.
  • They are bright zinc plated.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • Table 8 washers.
  • They are bright zinc plated.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • Diamond curved washers.
  • li>
  • Bright zinc plated CR3.
£0.00 Ex Tax: £0.00
  • A washer with serrations that extend radially inward or outward to bite into the bearing surface.
  • They can resist rotation more than a plain washer on hard surfaces, as the tension between washer and the surface is applied over a much smaller area.
  • The washers are bright zinc plated for increased corrosion resistance and conform to DIN6797 standards.
£0.00 Ex Tax: £0.00
  • A washer with serrations that extend radially inward or outward to bite into the bearing surface.
  • They can resist rotation more than a plain washer on hard surfaces, as the tension between washer and the surface is applied over a much smaller area.
  • The washers are bright zinc plated for increased corrosion resistance and conform to DIN6797 standards.
£0.00 Ex Tax: £0.00
  • Taper washers.
  • Designed to be used underneath nuts with tapered flanges to enable bolt assembly.
  • Self colour.
£0.00 Ex Tax: £0.00
  • Form A flat washers are thicker than the more popular form B type washers.
  • They are zinc plated for resistance to corrosion, and conform to DIN125 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • Form B flat washers are thinner than the heavier duty form A type washers.
  • They are zinc plated for resistance to corrosion, and conform to BS4320 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • These spring washers ring-shaped, split at one point and bent into a helix.
  • This shape means that the washer exerts a spring force between the fastener's head and the base item.
  • The main purpose of the spring washer is to prevent loosening of the fastener by either movement or vibration.
  • They are available with a square or rectangular section.
  • These washers are bright zinc plated for increased corrosion resistance.
£0.00 Ex Tax: £0.00
  • Form A flat washers are thicker than the more popular form B type washers.
  • They are zinc plated for resistance to corrosion, and conform to DIN125 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • Form B flat washers are thinner than the heavier duty form A type washers.
  • They are zinc plated for resistance to corrosion, and conform to BS4320 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • Form C flat washers.
  • They are zinc plated for resistance to corrosion, and conform to BS4320 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • These shakeproof washers are designed to allow a secure fastening, preventing loosening of the fastener by either movement or vibration.
  • Also known as serrated washers or star washers, they have serrations that extend radially inward and/or outward to bite into the bearing surface.
  • This type of washer is effective as a lock washer when used with a soft substrate, such as aluminium or plastic.
  • The washers are bright zinc plated for increased corrosion resistance and conform to DIN6797 standards.
£0.00 Ex Tax: £0.00
  • These shakeproof washers are designed to allow a secure fastening, preventing loosening of the fastener by either movement or vibration.
  • Also known as serrated washers or star washers, they have serrations that extend radially inward and/or outward to bite into the bearing surface.
  • This type of washer is effective as a lock washer when used with a soft substrate, such as aluminium or plastic.
  • The washers are bright zinc plated for increased corrosion resistance and conform to DIN6797 standards.
£0.00 Ex Tax: £0.00
  • These spring washers ring-shaped, split at one point and bent into a helix.
  • This shape means that the washer exerts a spring force between the fastener's head and the base item.
  • The main purpose of the spring washer is to prevent loosening of the fastener by either movement or vibration.
  • They are available with a square or rectangular section.
  • These washers are bright zinc plated for increased corrosion resistance.
£0.00 Ex Tax: £0.00
  • Form A flat washers are thicker than the more popular form B type washers.
  • They are zinc plated for resistance to corrosion, and conform to DIN125 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • Form B flat washers are thinner than the heavier duty form A type washers.
  • They are zinc plated for resistance to corrosion, and conform to BS4320 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • Form C flat washers.
  • They are zinc plated for resistance to corrosion, and conform to BS4320 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • Name 'Penny Washer' due to their similarity in size to an old penny.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
  • The washers are bright zinc plated for increased corrosion resistance.
£0.00 Ex Tax: £0.00
  • These spring washers ring-shaped, split at one point and bent into a helix.
  • This shape means that the washer exerts a spring force between the fastener's head and the base item.
  • The main purpose of the spring washer is to prevent loosening of the fastener by either movement or vibration.
  • They are available with a square or rectangular section.
  • These washers are bright zinc plated for increased corrosion resistance.
£0.00 Ex Tax: £0.00
  • Form A flat washers are thicker than the more popular form B type washers.
  • They are zinc plated for resistance to corrosion, and conform to DIN125 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • Form B flat washers are thinner than the heavier duty form A type washers.
  • They are zinc plated for resistance to corrosion, and conform to BS4320 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • Form C flat washers.
  • They are zinc plated for resistance to corrosion, and conform to BS4320 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00